施工圍欄的重復利用的方法

The method of reusing construction fences

施工圍擋重復利用，施工圍擋韌性更強，施工圍擋拆卸方便，施工圍擋施工更加整潔。現在社會都提倡低碳生活，人人都應參與。以前不管建筑工地建設、道路建設等四周都會使用水泥圍墻來進行圍堵，來維護環境，那樣成本很高，而且一旦建設完成就必須拆掉，既浪費材料成本，又對環境造成了污染。

The construction fence is reused, with stronger resilience, easier dismantling, and cleaner construction. Nowadays, society advocates low-carbon living, and everyone should participate. Previously, cement fences were used to enclose construction sites, roads, and other areas to maintain the environment, which was costly and had to be dismantled once completed. This not only wasted material costs but also caused pollution to the environment.

施工圍擋大部分的代替了水泥圍墻。可持續使用10年以上，即使是反復裝卸、搬運、拆卸亦能周轉5次以上，只要使用一次即可收回磚混圍墻80%的成本，使用5次以上，每次只有磚混圍墻25%的成本。

Most of the construction fences have replaced cement walls. Sustainable use for more than 10 years, even with repeated loading, unloading, handling, and dismantling, it can be turned over more than 5 times. With just one use, 80% of the cost of the brick concrete wall can be recovered. With more than 5 uses, only 25% of the cost of the brick concrete wall can be recovered each time.

施工圍擋采用彩鋼夾心板做墻面，背后用金屬方管或角鋼做圍擋骨架，用金屬方管制成定型三角架支撐，再用中的鍍施工圍擋重復利用鋅角鐵或者膨脹螺絲固定三角架。

The construction fence adopts color steel sandwich panels as the wall surface, with metal square pipes or angle steel as the fence skeleton at the back. The metal square pipes are used to make a shaped tripod support, and then the galvanized construction fence is reused to fix the tripod with zinc angle iron or expansion screws.

施工圍擋穩定性好，抗風雨、防傾倒能力強，美觀整齊、不變形，便于安裝、拆除、運輸，能重復使用，且成本低。

The construction fence has good stability, strong resistance to wind and rain, and anti tipping ability. It is beautiful, neat, and not deformed, easy to install, remove, and transport, can be reused, and has low cost.

施工圍擋尤其適用于修路、建橋等線型工地以及基礎較深的土建工地。對于行人車輛、人員起到保護作用，對于防塵降噪、美化城市彩鋼圍墻發揮積極作用。

Construction fences are particularly suitable for linear construction sites such as road and bridge construction, as well as civil construction sites with deep foundations. It plays a protective role for pedestrians, vehicles, and personnel, and plays a positive role in dust prevention, noise reduction, and beautification of urban color steel walls.

施工圍擋臨時圍墻特點;彩鋼板臨時圍墻采用鋼結構柱，雙面夾芯彩鋼板或單層壓型彩鋼板通過螺栓連接而成。用彩鋼板固定于柵欄之上，用于臨時工地的隔離，方便、可多次使用。

Characteristics of temporary construction fence; The temporary enclosure of color steel plate adopts steel structure columns, and is connected by bolts with double-sided sandwich color steel plate or single-layer pressed color steel plate. Fixed on the fence with colored steel plates for temporary site isolation, convenient and reusable.

圍欄精益求精的制作工藝

Striving for excellence in production techniques

鍛造工藝：鍛造是鐵藝護欄制作的核心工藝之一，通過加熱鋼材，使其達到一定的可塑性，再利用錘子、砧子等工具進行反復捶打，塑造出各種形狀。在鍛造過程中，工匠們憑借豐富的經驗和精湛的技藝，精準控制力度和角度，使每一個部件都呈現出獨特的質感和造型。

Forging process: Forging is one of the core processes in the production of wrought iron guardrails. It involves heating steel to achieve a certain degree of plasticity, and then repeatedly pounding it with tools such as hammers and cutting to shape various shapes. During the forging process, craftsmen rely on their rich experience and exquisite skills to precisely control the force and angle, resulting in each component presenting a unique texture and shape.

焊接工藝：焊接質量直接影響鐵藝護欄的整體強度和穩定性。在濟南鐵藝護欄制作中，常采用氬弧焊工藝，這種焊接方式能夠在焊接過程中提供惰性氣體保護，有效防止金屬氧化，確保焊縫光滑、牢固。焊接時，要求焊縫均勻、飽滿，無氣孔、裂紋等缺陷，焊接點的強度需達到母材的 80% 以上。

Welding process: The welding quality directly affects the overall strength and stability of the wrought iron guardrail. In the production of iron railings in Jinan, argon arc welding technology is often used. This welding method can provide inert gas protection during the welding process, effectively prevent metal oxidation, and ensure smooth and firm welds. When welding, it is required that the weld seam is uniform, full, and free of defects such as pores and cracks. The strength of the welding point should reach more than 80% of the base metal.

表面處理工藝：除了前面提到的熱鍍鋅和噴塑處理，打磨和拋光也是重要的表面處理環節。打磨能夠去除鋼材表面的毛刺、鐵銹和焊接痕跡，使表面更加平整；拋光則進一步提升表面的光潔度，增強護欄的美觀度。

Surface treatment process: In addition to hot-dip galvanizing and spray coating mentioned earlier, grinding and polishing are also important surface treatment steps. Grinding can remove burrs, rust, and welding marks on the surface of steel, making the surface smoother; Polishing further improves the surface smoothness and enhances the aesthetic appeal of the guardrail.

本文由濟南鐵藝護欄友情奉獻.更多有關的知識請點擊:http://www.fmlighting.com.cn我們將會對您提出的疑問進行詳細的解答，歡迎您登錄網站留言.

This article is dedicated to friendship For more information, please click: We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message